
The basic principle of all the BeamSplitter range is to reflect an image by 45 degrees by a reflective sheet of glass. Each BeamSplitter product comes with a special coated 65/35 reflective glass sheet which reflects 65% of the light one side and 35% the other.
By placing the glass in a dark box, it enables you to shoot through the glass virtually unimpeded while whoever is looking at the box/camera see’s either the Directors face reflected back or scrolling text from the tablet.
In the case of the of the Q45 or EyeQ45, the glass can also reflect scrolling text from a tablet for use as a Teleprompt or Portaprompt device.

The main difference between the EyeQ45 Duo and the EyeQ45 is the flexibility of the interviewer’s position.
EyeQ45 Duo: Features two openings (one on each side of the camera), allowing the interviewer to sit on either side of the device.
EyeQ45: Features only one opening, positioned on the side opposite the camera operator.
In short, the Duo offers bilateral setup options, whereas the Standard model is restricted to a single configuration.

If you can get the lens to gently touch the glass inside the box the widest I’ve managed is around 20 to 22 mm on a zoom lens, which should translate the same on a Prime/ stills lens. It really depends how close the glass of the lens can get to the glass inside the device.

All the Beamsplitter range should fit on any camera which uses Matte Box bars. Each kit comes with a pair of 30 cm long, 8 mm wide aluminium tubes which should slide inside your bars. See the photo below, this should give you an idea of what I mean, but feel free to drop me a line if you have any questions. The Matte box bars shown in the photo are carbon fibre but standard aluminium one’s will work just as well.

I supply a blank rear Correx plate which you line up your lens against a constructed BeamSplitter (which ever one you have purchased). This is because not all Matte Box bars are the same height which can lead to mismatching with pre-cut holes.
Simply push the lens up against the rear plate, draw around with a marker pen and cut out the shape. The beauty of Correx is although very strong it’s very easy to cut, a decent pair of scissors or a craft knife will do.

The internal width for of the Q45 is 26 cm and the EyeQ45 is 29 cm, so as long as your tablet isn’t wider than this it will fit. Each kit comes with 2 strips of self-adhesive hook and eye Velcro which you can stick to the rear of the tablet. This helps secure it inside either the Q45 or EyeQ45 and stop it sliding out if you happen to move quickly.
The easiest method is remove the paper from the back of the ‘eye’ part of the velcro and stick onto the tablet, then attach the ‘hook’ part to the ‘eye’ part, remove the paper strip from the back and carefully line up the tablet while the glass is in place and stick inside the box.

If you are not happy with the device I offer a full refund after 14 days of purchase.
Yes I can supply all the parts, including the glass. Drop me an email and I can give you a price.
We use the same glass that is used by Autoque and EyeDirect, it has a special 65/35 reflective surface coating which requires delicate handling. Each kit comes with a microfibre cloth to remove dust and fingerprints. You may want to invest in some alcohol swipes or a small bottle of glass cleaner to carry with the kit.